Moisture control
Desiccant Masterbatch for Recycled & Moist Plastics
SPHERE Desiccant absorbs moisture present in the material during processing, helping the product come out cleaner with fewer bubbles and spots — especially with recycled or long-stored material.
Technical file (TDS / COA / MSDS) on requestTechnical overview
- Category
- Moisture control
- Family
- Moisture Control
- Available grades
- On request
- Applications
- Blown Film, Injection Molding, Extrusion, Sheets and Thermoforming, Recycled Plastics
- How to obtain
- A sample tested on your line before ordering
The problem it addresses
Opening the roll to find bubbles or spots caused by moisture?
Practical benefits
- Helps reduce moisture-related bubbles and spots
- Supports steadier processing with recycled material
- Reduces scrap and stoppages caused by material moisture
- Easy to add on the line without major setup changes
How to know if you need this product
- When bubbles appear while running moist material
- When you run recycled plastic from a variable source
- When the product shows spots or an uneven surface
Related production problems
Frequently asked questions
Can the Desiccant Masterbatch replace material drying?
Desiccant Masterbatch can help manage limited moisture during processing and reduce moisture-related defects. However, it may not fully replace drying for highly hygroscopic materials or materials with high moisture levels. The suitable dosage should be determined through production testing.
Need the technical file?
Send us the product and your application, and we'll share the right file directly on WhatsApp.
Technical documents are shared directly after contact and are not published publicly.
Test the product on your line first. Then decide.
Direct contact: 01018754332